0 artículo(s)
Ver cesta
No tiene artículos en su carrito de compras.
Tapa de registro de control, redonda 6" x 7.5", tapa dúctil
The EMCO Wheaton A0721-106 is a 6" monitoring well manhole with a painted ductile iron bolt-down lid and galvanized steel skirt. At just 6.3 lbs with a 7.5" overall height,...
$ 55.75
Tapa de registro de control, tapa redonda de hierro de 8 "x8"
The EMCO Wheaton A0721-188L is an 8" monitoring well manhole with a lay-in (drop-in) lid — no bolts required for routine access. The large notch on the lay-in lid eliminates...
$ 66.93
Tapa de registro de control, redonda 8 "x12" dúctil atornillada
The EMCO Wheaton A0721-008 is an 8" monitoring well manhole with a painted ductile iron bolt-down lid and polyethylene skirt. The poly skirt resists corrosion in aggressive soil conditions and...
$ 83.67
Tapa de registro de control, redonda 5 "X 8", atornillada
The EMCO Wheaton A0721-105 is a 5" monitoring well manhole with a painted ductile iron bolt-down lid and galvanized steel skirt. Designed for smaller-diameter wells and piezometers, this compact unit...
$ 50.22
Tapa de registro de control, faldón metálico redondo de 8" x 8" de largo
The Martin Products MWL8008SM is a 8" monitoring well manhole cover with a long galvanized steel skirt. Provides traffic-rated access protection for groundwater monitoring wells. The extended skirt height accommodates...
$ 122.00
Tapa de registro de control, tapa redonda de 4" x 8" atornillada
The Koby Environmental MH48 is a compact 4" x 8" monitoring manhole cover with a bolt-in lid. Designed for small-diameter monitoring wells where a full-size manhole is unnecessary. The bolt-in...
$ 36.64
Tapa de registro de control, redonda 12" x 12" atornillada
The EMCO Wheaton A0721-101 is a 12" monitoring well manhole with a white painted ductile iron bolt-down lid and galvanized steel skirt. The steel skirt provides maximum structural rigidity in...
$ 169.54
Tapa de registro de control, tapa redonda de 3" x 6" atornillada
The Koby Environmental MH36 is a compact 3" x 6" monitoring manhole cover with a bolt-in lid. Designed for small-diameter monitoring wells and piezometers where a full-size manhole is unnecessary....
$ 31.13
Tapa de registro de control, faldón metálico redondo de 8" x 12" de longitud
The Martin Products MWL8012SM is a 8" monitoring well manhole cover with a long galvanized steel skirt. Provides traffic-rated access protection for groundwater monitoring wells. The extended skirt height accommodates...
$ 125.00
Tapa de registro de control, redonda 8 "x12" acero dúctil negro
The EMCO Wheaton A0721-108 is an 8" monitoring well manhole with a black painted ductile iron bolt-down lid and galvanized steel skirt. The steel skirt provides rigid support in granular...
$ 91.47
Tapa de registro de control, redonda 8" x 8", 3 tornillos
The EMCO Wheaton A0721-308 is an 8" monitoring well manhole with a 3-bolt lid configuration and white painted ductile iron lid. The 3-bolt design provides secure closure with faster access...
$ 78.09
Tapa de registro de control, falda de plástico redonda de 8" x 8" de largo
The Martin Products MWL8075PL is a 8" monitoring well manhole cover with a long polyethylene skirt. Provides traffic-rated access protection for groundwater monitoring wells. The extended skirt height accommodates deeper...
$ 90.91Flush-Mount Well Access
When a monitoring well needs to be completed at grade — in a parking lot, sidewalk, or paved area — a monitoring well manhole provides the surface-level access point. The manhole frame sits flush with the surrounding surface, and the cover protects the well casing below.
These are different from standard sewer manholes. Monitoring well manholes are smaller (typically 5” to 18”), designed to accommodate well casing rather than human entry, and often require bolt-down or locking lids for regulatory compliance.
Key Considerations
- Traffic loading — Will vehicles drive over the cover? If yes, choose ductile or cast iron with appropriate load rating.
- Well casing size — The manhole opening must accommodate your well casing diameter plus any above-ground fittings (caps, plugs, sampling ports).
- Security — Bolt-down lids prevent unauthorized access and satisfy most regulatory requirements for well security.
Related Categories
- Locking Well Plugs — Seal the well casing inside the manhole
- Well Protectors — Above-ground enclosures for wells that extend above grade
- All Manholes
PREGUNTAS FRECUENTES
What’s the difference between a monitoring well manhole and a standard manhole?
Monitoring well manholes are smaller (5”–18” vs. 12”–44”+) and designed for well casing access, not human entry. They’re used for flush-mount well completions in paved areas.
Do I need a manhole AND a well plug?
Typically yes. The manhole provides the surface-level access frame. The well plug or cap seals the actual well casing inside the manhole. They serve different functions.
