0 artículo(s)
Ver cesta
No tiene artículos en su carrito de compras.
Protector de pozo cuadrado, tapa de aluminio, 4" X 5' de altura
The EMCO Wheaton A0727-004A is a 4" square well protector standing 5 feet tall with a die-cast aluminum raintight cap. Designed to protect monitoring well casings from vandalism, weather, and...
$ 158.38
2" Tapón de pozo con cierre torquer SCH 80
The Koby 2" Torquer Locking Well Plug (T2 80) seals monitoring well casings from the inside using an internal expansion design — no metal parts means no corrosion or rust...
$ 7.53
Tapón de bloqueo de baja presión Cherne 2" Econ-O-Grip
The Cherne 2" Econ-O-Grip plug (part #271-527) is a low-cost mechanical blocking plug for 2" pipe — rated for 2 PSI maximum. Natural rubber O-ring with galvanized metal plates and...
$ 4.49
Cherne® 4" Inside-of-pipe Gripper® Plug,17 PSI - 40 ft.
The Cherne 4" Inside-of-Pipe Gripper (part #270-296) is a mechanical test plug that seals inside the bore of 4" pipe — position it anywhere along the run, not just at...
$ 14.57
Cherne® 1/2" Kwik 'n Sure® Plug, PSI 180
The Cherne 1/2" Kwik Sure plug (part #269-840) is a high-pressure mechanical test plug rated for 180 PSI. Designed for quick pipe sealing on 1/2" lines — the Kwik Sure...
$ 8.01
Manómetro Cherne® para la comprobación de líneas de gas, drenaje, residuos y ventilación
The Cherne Manometer (part #10205) is a precision measuring instrument for testing gas lines, drain, waste, and vent (DWV) systems. Essential for plumbing code compliance testing — provides accurate pressure...
$ 55.96
3.5" Tapón de pozo con cierre torquer
The Koby 3.5" Torquer Locking Well Plug (T3.5) seals monitoring well casings from the inside using an internal expansion design — no metal parts means no corrosion or rust contamination....
$ 23.87
Cherne® 1-1/4" Kwik 'n Sure® Plug, PSI 112
The Cherne 1-1/4" Kwik Sure plug (part #269-883) is a high-pressure mechanical test plug rated for 112 PSI. Designed for quick pipe sealing on 1-1/4" lines — the Kwik Sure...
$ 10.49
Cherne ® Juego de tapones para bañera, rebosadero y desagüe
The Cherne Tub Plug Set — Overflow & Drain (part #012-678) seals both the overflow and drain openings for pressure testing bathtub plumbing. The set includes plugs for both openings,...
$ 13.08
4" FlushLock Bloqueo Bien Enchufe SCH 40
The Koby 4" FlushLock Locking Well Plug (FL4) sits flush with the well casing top — the right choice when above-grade caps are not permitted in paved areas, roadways, or...
$ 19.96
Protector de pozo cuadrado, tapa de aluminio, kit superior, 4".
The EMCO Wheaton A0727-004K is a replacement top kit for the 4" square well protector. Includes the one-piece die-cast aluminum powder-coated raintight cap with contrasting black triangle (per API recommendation),...
$ 66.93
6.5" Tapón de pozo con cierre torquer
The Koby 6.5" Torquer Locking Well Plug (T6.5) seals monitoring well casings from the inside using an internal expansion design — no metal parts means no corrosion or rust contamination....
$ 73.44Equipment for Every Stage of the Monitoring Well Lifecycle
Whether you’re installing a new monitoring well network, conducting Phase II ESA sampling, or maintaining a long-term remediation site, the hardware you use determines data quality. Cross-contaminated samples, tampered wells, and failed seals aren’t just operational headaches — they’re regulatory liability.
We supply environmental consultants, remediation contractors, and water utilities with the well security and sampling equipment they need to keep sites compliant and data defensible.
Shop by Application
Well Security & Sealing
Locking well plugs (Torquer, FlushLock, J-Plug, H-Plug) seal the well from inside the casing. Locking well caps (Grip-N-Lock) fit over the exterior and are faster for routine sampling access. Both accept padlocks for chain-of-custody documentation.
Vapor & Gas Monitoring
Torquer vapor extraction plugs and Ex-Cap fittings allow controlled gas sampling and vapor recovery while maintaining a secure seal. These are specified in landfill gas monitoring programs, soil vapor extraction systems, and Phase II ESAs requiring VOC screening.
Groundwater Sampling
Groundwater bailers for grab sampling in monitoring wells. Disposable polyethylene and PVC bailers eliminate cross-contamination between wells. Permanent PVC bailers for dedicated single-well programs. Available individually or in cases of 24.
Ordering for Multi-Well Projects
Most of our well monitoring customers order for 20–200+ well sites. Call (866) 514-3684 to get volume pricing, confirm casing compatibility, and coordinate mixed-size shipments. We ship same-day on in-stock items ordered before 1pm CT.
PREGUNTAS FRECUENTES
What’s the difference between a well plug and a well cap?
A plug seals from inside the pipe casing using an expansion gasket. A cap fits over the outside of the pipe. Plugs create a flush or below-grade seal; caps extend above the casing and are quicker to remove for sampling access.
What equipment do I need for Phase II ESA monitoring wells?
At minimum: locking well plugs or caps (for well security between sampling events), groundwater bailers (for grab samples), and if VOC screening is required, vapor extraction plugs. We can help you spec the full list — call (866) 514-3684.
Do you supply for projects across multiple states?
Yes. We ship nationwide and regularly supply multi-site remediation projects. One order can include mixed sizes and product types shipped to a single location or split across project sites.
