0 artículo(s)
Ver cesta
No tiene artículos en su carrito de compras.
Enchufe de derivación de hierro Cherne de 8", 4,3 PSI, ½" de derivación
The Cherne 8" Iron Grip Bypass Plug (part #268-088) is a heavy-duty cast iron mechanical test plug with 1/2" NPT bypass for 8" sewer and storm pipe. Rated for 4.3...
$ 150.44
Tapón de derivación de hierro de 4" de Cherne, 8,7 PSI, ½" de derivación
The Cherne 4" Iron Grip Bypass Plug (part #268-048) is a cast iron mechanical test plug with 1/2" NPT bypass for 4" sewer and drain pipe — the most common...
$ 40.75
Cherne® 4" Kwik 'n Sure® Plug, PSI 24
The Cherne 4" Kwik Sure plug (part #269-948) is a high-pressure mechanical test plug rated for 24 PSI. Designed for quick pipe sealing on 4" lines — the Kwik Sure...
$ 46.16
Protector de pozo cuadrado, tapa de aluminio, kit superior de 6".
The EMCO Wheaton A0727-006K is a replacement top kit for the 6" square well protector. Includes the one-piece die-cast aluminum powder-coated raintight cap with contrasting black triangle (per API recommendation),...
$ 97.45
Tapón Econ-O-Grip® Cherne® de 4" de acero inoxidable
The Cherne 4" Stainless Steel Econ-O-Grip plug (part #273-348) is a chemical-resistant blocking plug for 4" pipe in petroleum and chemical environments. Nitrile rubber O-ring with stainless steel hardware provides...
$ 42.94
Tapón Econ-O-Grip® Cherne® de 3" de acero inoxidable
The Cherne 3" Stainless Steel Econ-O-Grip plug (part #273-338) is a chemical-resistant blocking plug for 3" pipe in petroleum, chemical, and industrial environments. Nitrile rubber O-ring resists petroleum and chemical...
$ 34.51
Tapón de derivación Cherne de 3" con agarre de hierro, 11 PSI, ½" de derivación
The Cherne 3" Iron Grip Bypass Plug (part #268-038) is a cast iron mechanical test plug with 1/2" NPT bypass for 3" sewer and drain pipe testing. Rated for 11...
$ 32.87
Cherne® 2" Sure-Grip® Tapón de prueba de agua y aire, 22 PSI
The Cherne 2" Sure-Grip plug (part #271-208) is a tool-free mechanical test plug for water and air testing on 2" Schedule 40 and Schedule 80 pipe. Rated for 22 PSI...
$ 7.36
Enchufe Cherne® de 10" con mango en T de aluminio (sin derivación)
The Cherne 10" Aluminum T-Handle Gripper (part #272-914) is a heavy-duty mechanical blocking plug for full shutoff on 10" underground pipe. Rated for 10 PSI / 23 ft. head pressure....
$ 419.91
2" FlushLock Locking Well Vapor Extraction Plug SCH 40
The Koby 2" FlushLock Vapor Extraction Locking Well Plug (FL2VE) sits flush with the well casing top — the right choice when above-grade caps are not permitted in paved areas,...
$ 62.42
Enchufe Cherne® de aluminio con mango en T de 8" (sin derivación)
The Cherne 8" Aluminum T-Handle Gripper (part #272-906) provides full pipe blockage on 8" underground sewer and storm pipe — complete shutoff with no bypass. Rated for 17 PSI /...
$ 290.60
1.5 " Torquer Locking Well Vapor Extraction Plug SCH 40
The Koby 1.5" Torquer Vapor Extraction Plug (T1.5VE) enables vapor and groundwater sampling through a vented port without removing the plug — preserving well integrity and preventing cross-contamination. Internal expansion...
$ 40.80Equipment for Every Stage of the Monitoring Well Lifecycle
Whether you’re installing a new monitoring well network, conducting Phase II ESA sampling, or maintaining a long-term remediation site, the hardware you use determines data quality. Cross-contaminated samples, tampered wells, and failed seals aren’t just operational headaches — they’re regulatory liability.
We supply environmental consultants, remediation contractors, and water utilities with the well security and sampling equipment they need to keep sites compliant and data defensible.
Shop by Application
Well Security & Sealing
Locking well plugs (Torquer, FlushLock, J-Plug, H-Plug) seal the well from inside the casing. Locking well caps (Grip-N-Lock) fit over the exterior and are faster for routine sampling access. Both accept padlocks for chain-of-custody documentation.
Vapor & Gas Monitoring
Torquer vapor extraction plugs and Ex-Cap fittings allow controlled gas sampling and vapor recovery while maintaining a secure seal. These are specified in landfill gas monitoring programs, soil vapor extraction systems, and Phase II ESAs requiring VOC screening.
Groundwater Sampling
Groundwater bailers for grab sampling in monitoring wells. Disposable polyethylene and PVC bailers eliminate cross-contamination between wells. Permanent PVC bailers for dedicated single-well programs. Available individually or in cases of 24.
Ordering for Multi-Well Projects
Most of our well monitoring customers order for 20–200+ well sites. Call (866) 514-3684 to get volume pricing, confirm casing compatibility, and coordinate mixed-size shipments. We ship same-day on in-stock items ordered before 1pm CT.
PREGUNTAS FRECUENTES
What’s the difference between a well plug and a well cap?
A plug seals from inside the pipe casing using an expansion gasket. A cap fits over the outside of the pipe. Plugs create a flush or below-grade seal; caps extend above the casing and are quicker to remove for sampling access.
What equipment do I need for Phase II ESA monitoring wells?
At minimum: locking well plugs or caps (for well security between sampling events), groundwater bailers (for grab samples), and if VOC screening is required, vapor extraction plugs. We can help you spec the full list — call (866) 514-3684.
Do you supply for projects across multiple states?
Yes. We ship nationwide and regularly supply multi-site remediation projects. One order can include mixed sizes and product types shipped to a single location or split across project sites.
