0 artículo(s)
Ver cesta
No tiene artículos en su carrito de compras.
6" Torquer Locking Well Vapor Extraction Plug SCH 40
The Koby 6" Torquer Vapor Extraction Plug (T6VE) enables vapor and groundwater sampling through a vented port without removing the plug — preserving well integrity and preventing cross-contamination. Internal expansion...
$ 73.44
4" FlushLock Locking Well Vapor Extraction Plug SCH 40
The Koby 4" FlushLock Vapor Extraction Locking Well Plug (FL4VE) sits flush with the well casing top — the right choice when above-grade caps are not permitted in paved areas,...
$ 73.44
El monitor "Cherne 2", el tapón de cierre del pozo...
The Cherne 2" Monitor Well Locking Plug (part #271-675) is a pneumatic locking plug for 2" monitoring wells — the most common monitoring well diameter. Pneumatic inflation provides a positive,...
$ 37.83
Cherne® 1 ½" Gripper® Plug, 17 PSI - 40 ft.
The Cherne 1-1/2" End-of-Pipe Gripper (part #270-210) is a mechanical test plug for small-diameter DWV pipe testing. It seats at the pipe end and cannot fall in — rated for...
$ 7.65
Cherne® Jet-Ball™ Bolas de limpieza, 10-14 pulgadas con pernos de ojo
The Cherne Jet-Ball Cleaning Ball 10"-14" (part #254-215) is a sewer cleaning ball for 10" to 14" pipe with eye bolts for retrieval. Uses water pressure to scour pipe walls...
$ 436.28
Manómetro de 2" Cara 0-15 psi - Incrementos de 0,1 psi
The Gauge 2" Face 0-15 PSI (0.1 PSI Increments) (part #024-568) is a precision low-range gauge with 0.1 PSI increment markings. 2" face for clear field reading. The fine increments...
$ 17.44
Cherne® 5" Kwik 'n Sure® Plug, PSI 8
The Cherne 5" Kwik Sure plug (part #269-956) is a mechanical test plug rated for 8 PSI. Fits 5" pipe — a hard-to-find size that many plug manufacturers skip. Natural...
$ 62.87
Tapón Cherne® de 15" con mango en T y derivación de 3/4
The Cherne 15" T-Handle Gripper with Bypass (part #272-981) is a heavy-duty aluminum mechanical test plug with 3/4" NPT male bypass for large-diameter concrete and clay sewer pipe. Rated for...
$ 696.60
Cherne® 2" Hub-Fit Gripper® Plug
The Cherne 2" Hub-Fit Gripper (part #270-528) is a mechanical test plug designed for 2" hub fittings and bell-end pipe — where standard gripper plugs won’t seat properly. Rated for...
$ 12.43
SinkFast® Disposable Groundwater Bailer 1.6″x36″ – Case of 24 Units
The SinkFast Disposable Groundwater Bailer (SF16x36SCW) is a 1.6" x 36" weighted disposable bailer engineered for the fastest possible descent in deep or high-water-table wells. The integrated weight system eliminates...
$ 125.00
Cherne® 0.39" Kwik 'n Sure® Plug, PSI 185
The Cherne 0.39" Kwik Sure plug (part #269-832) is a high-pressure mechanical test plug rated for 185 PSI. Designed for quick pipe sealing on 0.39" lines — the Kwik Sure...
$ 8.01
Enchufe del pozo de monitoreo del agua: 2 " amarillo EasyLock SCH 80
The Koby 2" EasyLock Well Plug (EL280) provides quick-install, tool-free locking for 2" monitoring wells. The twist-lock mechanism engages and disengages by hand — no keys, no padlocks, no wrenches....
$ 8.62Equipment for Every Stage of the Monitoring Well Lifecycle
Whether you’re installing a new monitoring well network, conducting Phase II ESA sampling, or maintaining a long-term remediation site, the hardware you use determines data quality. Cross-contaminated samples, tampered wells, and failed seals aren’t just operational headaches — they’re regulatory liability.
We supply environmental consultants, remediation contractors, and water utilities with the well security and sampling equipment they need to keep sites compliant and data defensible.
Shop by Application
Well Security & Sealing
Locking well plugs (Torquer, FlushLock, J-Plug, H-Plug) seal the well from inside the casing. Locking well caps (Grip-N-Lock) fit over the exterior and are faster for routine sampling access. Both accept padlocks for chain-of-custody documentation.
Vapor & Gas Monitoring
Torquer vapor extraction plugs and Ex-Cap fittings allow controlled gas sampling and vapor recovery while maintaining a secure seal. These are specified in landfill gas monitoring programs, soil vapor extraction systems, and Phase II ESAs requiring VOC screening.
Groundwater Sampling
Groundwater bailers for grab sampling in monitoring wells. Disposable polyethylene and PVC bailers eliminate cross-contamination between wells. Permanent PVC bailers for dedicated single-well programs. Available individually or in cases of 24.
Ordering for Multi-Well Projects
Most of our well monitoring customers order for 20–200+ well sites. Call (866) 514-3684 to get volume pricing, confirm casing compatibility, and coordinate mixed-size shipments. We ship same-day on in-stock items ordered before 1pm CT.
PREGUNTAS FRECUENTES
What’s the difference between a well plug and a well cap?
A plug seals from inside the pipe casing using an expansion gasket. A cap fits over the outside of the pipe. Plugs create a flush or below-grade seal; caps extend above the casing and are quicker to remove for sampling access.
What equipment do I need for Phase II ESA monitoring wells?
At minimum: locking well plugs or caps (for well security between sampling events), groundwater bailers (for grab samples), and if VOC screening is required, vapor extraction plugs. We can help you spec the full list — call (866) 514-3684.
Do you supply for projects across multiple states?
Yes. We ship nationwide and regularly supply multi-site remediation projects. One order can include mixed sizes and product types shipped to a single location or split across project sites.
